Our Printable HTV is the best heat transfer out there! It has a semi-gloss finish and is very vibrant, easy to weed and adheres to fabric like a dream!
 
Recommended: Medium Tack Magic Mask for transfer of design to garment.
*One complimentary Medium Tack Magic Mask is included with each patterned heat transfer vinyl order. 
 
If you need more than one sheet included in your order, they are available for purchase.
 
We've done all the work for you. Weeding and mask already done for you.
 
HTV Application Instructions: Use a squeegie rub it all again as with shipping Heat or cold in transit may loosen the bits.  Then just Peel design from backer.
Apply design at 305 F with medium pressure for 15 seconds
Peel mask from design while hot. These can be used on any type of cloth. No more limitations.
 
Printable Glitter Application Instructions
Time:12 seconds
Temperature:302°F/150°C
Pressure:Medium
Peel:Hot
 
Sublimation Instructions:
Sublimation Transfers MUST be applied with a heat press. A home iron will not work!!!
Cut around the graphic as close as you can.
Always Pre-Press your shirt for 5-10 seconds to get the moisture out! 

TEMP: 385-400 degrees
PRESSURE: Medium 
PRESS TIME: 40-60 Seconds

DO NOT FORGET a piece of paper inside the shirt to insure the ink is not transferred to back side of the shirt! Also use parchment paper on top of sublimation transfer so that the ink does not bleed onto your heat press plate

Remember that the sizing on all transfers may differ depending on the designs. 
 
Care Instructions for all HTV & Sublimation.
Machine wash inside-out using mild detergent.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.